HydroSen

- Detection of hydrogen
- Range of measuring between 10 ppm and 1.000 ppm
- Low power consumption
- Typical areas of use: Leakage- and safety monitoring of fuel cells or electrolysis equipment
Sensor type: | HydroSen |
Measurement principle: | Solid-electrolyte (Non-Nernst) |
Range of measuring: | 0 – 1.000 or 0 – 10.000 ppm H2 (max. 50 % UEG) |
Sensor temperature: | 630°C |
Sensor heat output: | ca. 3,0 W |
Reaction time of sensor element: | < 1 s |
Sensor signal: | 0 – 700 mV |
Temperature – are of use: | up to a maximum of 450 °C (depends on housing) |
Output electronics: | 0/4 – 20 mA and LAMTEC system bus |