CarboSen

Detection of unburnt CO/H₂(COequivalent)
Low power consumption
Applicable up to 450 °C
Fast response time T₆₀< 2 s
Easy to mount, compact design

Sensor Type	CarboSen
Principle of measurement	solid state electrolyte (Non-Nernst)
Measurement range	0… 10 000 ppm CO_e
Sensor temperature	approx. 630 °C
Sensor heater power	approx. 3.0 W
Response time	< 1 s
Sensor signal	0 – 750 mV (s. curve)
Temperature range in application	up to 450 °C (depends on housing)
Housing, electronics	customized
Output	0/4 – 20 mA and CAN-bus

The CarboSen is a miniaturized sensor system for the detection of oxidizable
gases. Using modern manufacturing processes, this sensor can be produced in huge quantities. The sensor is particularly suitable for measurements below 1 000 ppm CO_e.

The working principle of the solid electrolyte sensor is a Non-Nernstian mixed potential. This allows a CO_e detection starting from 10 ppm e.g. for in-situ measurement in the rough flue gas of oil-, gas- or biomass fired burners and heaters.

Temperature	Area of use	Specials
CarboSen1.000	Low-temperature up to 150°C	Low-temperature Heating value equipment Fuel cells	No reference gas needed Optional: Electronics CarboSenXC164 for controling and measurement value visualisation as analogue signal or via CAN-Bus
CarboSen1.000HT	Up to 450 °C exhaust gas temperature, non-condensing humidity	Exhaust gas measuring spots with -20 °C to 450 °C	No reference gas needed Optional: Electronics CarboSenXC164 for controling and measurement value visualisation as analogue signal or via CAN-Bus
CarboSen1.000ST	Up to 450 °C exhaust gas temperature	Exhaust gas measuring spots with -20 °C to 450 °C	No reference gas needed Integrated electronics inside sensor head

Combustion&Control

CarboSen