30 Nm – Alato

Control Drive 30 Nm, Type 662R2112

Running time 60 seconds on 90°
Control voltage 230 VAC / 50 Hz, three-point-step
2 Limit switches for limitation of operating displacements to 90° (factory-installed)
2 additional switch for free setting
1 Potentiometer NOVOTEC, 5 kΩ as position feedback
Electrical manual operation OPEN/CLOSE via
push-button
Protection type IP54

Type “662R2112” as “standard”
Output shaft [mm]	Ø12 x 30 mm, parallel key 4 x 4 x 14 mm
Voltage [v]	230 VAC / 50 Hz
Running Time	60 s
Angle of rotation default	90°
Controlling	TPS
Protection type	IP54
Electrical manual operation	OPEN / CLOSE-controlling via internal push-buttons
Permitted ambient temperature	-20…+60°C

Driving butterfly valves in your combustion applications, LAMTEC offers motors for electronic fuel/air ratio controls, operating- and safety-approved, following the slogan „Combustion technology – a one-stop shop“.

Of course, our motors fulfill safety-related requirements according to the use of potentiometers and their form-fitted and free-from-float connection. 4 types of standard motors are available on stock at LAMTEC: 6Nm, 20Nm, 30mN und 40Nm, all at 60 seconds running time.

Additionally, we can offer motors up to 200 Nm with different equipment of limit switches and potentiometers as well as different running times.
Our motors are to be used exclusively for driving actuators in combustion applications with LAMTEC combustion- and fuel/air ratio management systems, Types ETAMATIC, FMS or VMS.

Combustion&Control

Control Drive 30 Nm, Type 662R2112